Best Cheap Tool Kit – Save Money, Become a DIY Handyman
Wouldn’t it be nice to never hire an expensive handyman again? Becoming a DIY handyman saves you tons of money! You can learn how to do any job on YouTube. The tutorials on there are amazing and easy for anyone to follow. But to start working you’re going to need a great cheap tool kit.
The Absolute Best Cheap Tool Kit is the 68 piece Black+Decker home kit.
Why DIY is important and what are the essential DIY skills for a man?
Well, DIY is a very interesting practice for many individuals in a general household. As long as you have the best cheap tool kit, some encouragement, and skill, you can handle many tasks in your house without much trouble. There are many good reasons why you should handle those tasks by yourself instead of calling in for a professional.
- You will be able to save money
Probably the main reason behind involving in DIY is saving some money. Although it could be the most obvious reason, it is also the biggest reason. However, many individuals often neglect how much they can save. It is true that DIY can save money on labor and the potential markups with professional repairmen and contractors. In addition to that, you can save a considerable amount of money by preventing the respective household items from being replaced. All you need is a little mental grit and the best cheap tool kit.
- DIY is ecofriendly
If you are concerned about the environment (after all, we all should be), fixing things without throwing them away is a very smart move. Through such an approach, you will contribute to saving the space in the dump yard. In addition to that, you will save on the resources consumed to make a new product to replace the broken item.
- DIY helps to master your workmanship
When you handle a task in the form of DIY, you will gain the fullest control over the entire process. You will decide how the work is done, what tools are required and what materials should be used. Also, you will decide the quality of the end result. However, if the job is handled by a repairman, they are not concerned much about your stuff. They can even cause more damage and cost you more.
When you handle a certain task on your own, you can adjust the time frame to match your convenience. If you want to do it after your office work, that’s fine. If you want to do it when your kids are at school, you can change your schedule according to that. However, if you hire a professional handyman, you will have to change your daily routine to match their schedule.
- You gain a sense of accomplishment
Completing a certain task by yourself can boost your confidence and make you feel a sense of accomplishment. After all, it is great to feel that you have accomplished something successfully. Such confidence can motivate you significantly.
It is true that any DIY project (even the simplest ones), there is a learning curve involved. Therefore, in real life, you should know your limits before proceeding. For instance, you cannot start to do the entire electrical wiring of your house if you are not skilled and qualified in that. Another example is that you cannot carry out the entire plumbing network of your house if you have not done anything like that before. So, know your limits very well and don’t hesitate to call an expert if you are not 100% confident. Otherwise, you will end up doing more harm than good.
The essential DIY skills for a man
Now, in this section of our article, let’s learn about the essential DIY skills a man should have. Having these skills will be really handy on various occasions in real life.
- Wiring a plug
It is needless to mention that you will come across various instances in which you will have to wire plugs. Basically, many electrical problems associated with appliances emerge because of the faults of the plugs. Therefore, if you know how to wire a plug, you can save a considerable amount of time and money.
Make sure that you know that there is a color-coding system to identify wires. The red/brown wire which is placed on the right is the live wire. The blue/black wire which is located on the left is the neutral wire. The wire placed in the middle and fixed above the other two wires is the earth connection (it appears in yellow and green stripes).
To start the job, take out a screwdriver from your best cheap tool kit. Then, remove the back of the plug using the screwdriver. You should strip back the outer cable sleeve of the wire (for about 3-4cm). Then, strip back the sleeves of each individual wire (for about 5mm). Use your flathead screwdriver and loosen the internal terminals of the plug. Now you know the correct order, you can insert the ends of the wires accordingly into the terminals.
Tighten each terminal properly. Then, make sure that the cable grip holds the large cable. Fix the back cover of the plug tightly and that’s it.
- Bleeding a radiator
Radiators become exceptionally important when winter looms. Your radiator can cause expensive utility bills if they are cold at the top and warm towards the bottom. In order to fix this issue, you will have to bleed the radiator properly. This is not a difficult task at all. Just start the process by turning the heating off. As a result, no more water will enter the radiator while the bleeding process goes on. After that, you should find the bleed valve of the radiator. You can usually find it on the side. Some models come with a red-color handle as well. Then, place a rug or a bowl under the valve. Now, you can fetch the bleed key.
In order to bleed it, just place the key in the turn it using anticlockwise. You will notice a hissing sound and that’s the sign of escaping water. Once all the air trapped in the radiator is released, you can turn the key clockwise. Clean the potential spills around and turn on to see if the heating works.
- Repointing a brickwork
It is true that your bricklayer has done good work for you. However, as time goes on, the mortar on the brickwork can start to decay. In this case, you will have to repoint the brickwork and get its original shape.
To begin the process, you should start raking the joints of the brickwork. You can use a cold chisel and a good hammer. You should mix the mortar with the correct color combination to maintain the brickwork’s consistency. Also, you should make the mixture fairly stiff.
Get a trowel that is full of mortar and cut the prepared mixture into thin and long lines. These pieces should go in the joints. Use your trowel’s tip to insert the piece into the joints properly. You should start filling horizontal joints. Then, fill the vertical joints. Let it dry and then sweep the surface using a soft brush so you can clean up any loose mortar or dust.
- Putting up a shelf
Get your best cheap tool kit out of the drawer. Then, you should get a clear idea about the wall you will be working with. If the shelf will be fixed to a plasterboard wall, find the upright wooden supports. In this case, you will have to use a stud detector as well. The anchor brackets of the shell will be fixed to those wooden supports.
Hold one of the shelf brackets against the wall and set it vertically. You can use a spirit level to make it easy. Then, mark the holes using a pencil. Drill into the wall on the pencil marks. Be sure to use a drill bit one size smaller compared to the screws you will be using. Then, screw the brackets to the wall with the screws.
Then, you should use the spirit level and hold the shelf on the bracket you have already fixed. Then, decide where the holes for the second bracket goes. Repeat the steps you used to fix the first bracket. Now, you can place the shelf in place.
- Fixing a leaking tap
As the first step, you should turn off the water from the main supply. Then, turn on the faulty tap so water will escape.
Use a screwdriver found in your best cheap tool kit and remove the cover of the tap. Then, under the screw as well and remove the tap’s handle. You can unscrew the bonnet of the tap. Make sure that you use a spanner or a wrench (which should be included in your best cheap tool kit). Take the headgear of the tap off. You can see a body washer, jumper valve and an o-ring. Once the headgear is taken off, the jumper valve will fall out. Be sure to take all those components to replace them.
Use a waterproof lubricant on the components; tap spindle, bonnet, refit, and o-ring. Don’t tighten the nuts intensively. Put the tap back by reversing the process we have explained.
Well, as you can see, DIY work is fun and exciting apart from the benefits they deliver. However, to accomplish your DIY tasks successfully, you must have a good tool kit. BLACK+DECKER 20V MAX Drill & Home Tool Kit is the best cheap tool kit we can recommend for a large variety of DIY tasks. It comprises of 68 pieces and it supports nearly any DIY task you will handle at home.
If you loved this, check out our other handyman tips here.
The Frugal EfLast updated on: